● Home     ● Products    ●  Enquiry
 
 
   

 


ELECTRONIC ANEMOMETER (PORTABLE)

RANGE :
AIR VELOCITY : 0.25-15 MTR / SEC.
                        (LEAST COUNT : 0.01)

EXTENDED TO 30 MTRS./ SEC. ON REQUEST
                        (LEAST COUNT : 0.1)

AIR TEMPERATURE (OPTIONAL) : 0-100˚ C
MEASUREMENT

OPERATING TEMPERATURE :
      0 -   55˚ C FOR CONTINUOUS USE
      0 - 100˚ C INSTANTANEOUS READING
INSTRUMENT FOR HIGHER TEMPERATURE
   OFFERED AGAINST SPECIFIC INQUIRY

Electronic Anemometer, Portable Anemometers

Request Quote

THIS SOPHISTICATED INSTRUMENT IS DESIGNED WITH TOTALLY INDIGENOUS TECHNICAL KNOW-HOW AND COMPONENTS. IT DIRECTLY READS THE RATE OF FLOW OF AIR / GASES.

IT CONSISTS OF A CHEMICALLY ETCHED STAINLESS STEEL TURBINE, WHICH IS PIVOTED ON RE-ENFORCED JEWEL
BEARINGS, MAKING IT EXTREMELY SENSITIVE TO MINUTE CHANGES IN THE AIR-FLOW.

MOST OF THE INSTRUMENTS AVAILABLE IN MARKET ARE MADE OF PLASTIC.
THESE, THOUGH EFFICIENT UNDER LABORATORY CONDITIONS. OFTEN GIVE AWAY FOR INDUSTRIAL APPLICATIONS,
BRAKING THE BLADES / SHAFTS.

ACD WIND VANE SENSOR IS TOTALLY MADE OF METAL PARTS AND CAN STAND TO RIGOROUS INDUSTRIAL CONDITIONS. IT CONSISTS OF A CHEMICALLY ETCHED STAINLESS STEEL TURBINE, WHICH IS PIVOTED ON RE-ENFORCED JEWEL BEARINGS, MAKING IT EXTREMELY SENSITIVE TO MINUTE CHANGES IN THE AIR-FLOW.

NON-OPTICAL, NON-MAGNETIC, NON-CONTACT TRANSDUCER IS INSENSITIVE TO VIBRATIONS, DUST, TEMPERATURE, HUMIDITY, VERY HIGH INTENSITY MAGNETIC FIELDS. (AC OR DC) AND ULTRASONIC RADIATION.

OPTIONAL FACILITY FOR AIR TEMPERATURE MEASUREMENT CAN BE INCORPORATED IN THE SAME INSTRUMENT. AIR VELOCITY TRANSMITTERS (4-20 mA O/P)
 
AIR VELOCITY TRANSMITTERS (4-20 mA O/P)
AIR VELOCITY MONITORS       (STATIC PANEL TYPE)
AND AIR VELOCITY SWITCHES ARE ALSO OFFERED.
 

WEIGHT :

SENSOR                  

 -   280 gms.

INSTRUMENT                    

 -   500 gms.

TOTAL WITH CARRY CASE  

 - 1400 gms.

SIZE       :

CARRY CASE

 -   250 x 210 x 85 mm.
 


 
     
   

CUP ANEMOMETER
   

FOR METROLOGICAL APPLICATIONS
   

Cup Anemometer

Request Quote

RANGE
SUPPLY
DISPLAY
TEMPERATURE

  : 5 TO 180 KMTR / HR.
  : 220 OR 110 V AC 50 HZ
  : 3 - ½ DIGIT L.C.D.
  : -10˚ C TO 55˚ C
   

MODEL: CA-I
THREE CONIAL BEADED EDGED CUPS 127 mm. IN DIAMETERS, ATTACHED BY ARMS TO A CENTRAL BOSS DRIVE A
VERTICAL SPINDLE AT A ROTARY SPEED PROPORTIONAL TO THE AIR VELOCITY.
(DIMENSIONS CONFIRMING TO IS 5912 : 1970)

ALUMINUM AND STAINLESS STEEL ARE USED THROUGHOUT THIS INSTRUMENT TO ENSURE FREEDOM FROM
CORROSION AND LONG WORKING LIFE. A CONICAL SHIELD PROTECTS THE SPINDLE AND BEARING FROM THE RAIN.
AN ELECTRO MAGNETIC TRANSDUCER CONNECTED TO THE VERTICAL SHAFT GIVES PULSES PROPORTIONAL TO THE
NUMBER OF ROTATIONS OF THE VERTICAL SHAFT.

OPTIONAL 4-20 mA OUTPUT PROPORTIONAL TO THE VELOCITY CAN BE PROVIDED WHICH CAN BE FED TO ANY
DATA LOGGER OR PLC

MODEL: CA-II
OPTIONAL ALARM : INSTANTANEOUS VALUE IS COMPARTED WITH TWO ALARM SETTINGS AND GIVES VISUAL ALARM
AS WELL AS RELAY OUTPUT CHANGE OVER WHEN THE INSTANTANEOUS VALUE EXCEEDS THE SET LIMIT.

 

| Home |  Enquiry |
● Products● 
 ▪ Electronic Vibration Switches ▪ Vibration Meter & Sound Level Meters ▪ Dynamic Balancing Equipments ▪ Field Dynamic Balancing Equipments ▪ 
Low Oil Level Switch for Gear Box ▪ Electronic Anemometers ▪ Field Failure Relays ▪ AC & DC Current Sensors ▪ 
 
 Designed & Hosted by : MID   Promoted by : GID